![](https://downloads.ecoforest.com/wp-content/uploads/2022/11/ecogeo.png)
Heat pump ecoGEO+ 1-6 PRO
The new ecoGEO+ PRO ground source heat pump is the first ground source heat pump with natural refrigerant without any limitations for indoor installation. The natural refrigerant has many advantages:
- It is 700 times more environmentally friendly than traditional refrigerants
- Large operation map achieving high performance even in extreme conditions
- Production temperature above 70ºC, this means that it can be used even with radiators
![](https://ecoforest.com/wp-content/uploads/2021/08/refrigerantes-1024x432.png)
*In the image we can see the GWP value (Global Warming Potential) of the R290 compared to the rest of the refrigerants
Our R&D department, after several years of development, has obtained a compact geothermal heat pump with unique functionalities. Thanks to Inverter technology and ecoGEO+ control strategies, the ecoGEO+ geothermal heat pump is the most intelligent and flexible on the market. This, unlike the norm, allows us to adapt the heat pump to the installation, and not the other way around, achieving great savings in the installation as well as reducing the energy consumption of a home by up to 80% by using a renewable energy source and minimising CO2 emissions to the environment
![](https://ecoforest.com/wp-content/uploads/2021/08/ecoGEO_home-1024x459.png)
Features
- Power range: 1-6 kW
- Heating production with a performance (COP, B0/W35) of up to 4.3, depending on the model
- Quick and sensible control through internet, using ecoSMART easynet module
- Compatible with energy managers ecoSMART e-manager and e-system, which allows the use of renewable produced electricity to power the ecoGEO<sup>+</sup> heat pumps
- Active cooling production with a performance (EER, B35/W7) of up to 4.5, depending on the model
- Integrated passive cooling in models C2 na C4. The ecoGEO<sup>+</sup> controller also allows other models to control passive cooling with external plumbing
- Domestic hot water production with integrated stainless steel tank of 165 litres
- Emergency electrical inline heater incorporated, opcional in all models
- Integrated cascade control of up to 3 units, extending the power range to a maximum of 66kW
- Single phase (230V) and three phase (400V) power supply options
- Dimensions ecoGEO Basic: 1060x550x602mm · ecoGEO Compact: 1804x600x720mm
Click on the drop-down menu to show files in French, German, Dutch and Italian
Technical manuals (4)
This section is only for registered users. Register
Technical datasheets (1)
Pricelist (1)
This section is only for registered users. Register
PV hybridization (3)
This section is only for registered users. Register
Certificates (3)
This section is only for registered users. Register
Software (17)
This section is only for registered users. Register
Connectivity (3)
This section is only for registered users. Register
Ecoforest Academy (16)
This section is only for registered users. Register
Technical service (27)
This section is only for registered users. Register
Procedures (4)
This section is only for registered users. Register