Heat pump ecoGEO⁺ 2-10 PRO

In December 2020 Ecoforest launched the ecoGEO+ 1-6 PRO model and became the first European manufacturer to launch a ground source heat pump with natural refrigerant R290. In November 2023, the range was extended with the ecoGEO+ 2-10 PRO a...

View more

In December 2020 Ecoforest launched the ecoGEO+ 1-6 PRO model and became the first European manufacturer to launch a ground source heat pump with natural refrigerant R290. In November 2023, the range was extended with the ecoGEO+ 2-10 PRO and ecoGEO+ 4-16 PRO models to meet the needs of any installation with the advantages of natural refrigerant:  

  • A forward-looking refrigerant: the natural refrigerant R290 has a global warming coefficient 700 times lower than that of synthetic refrigerants. As a result, the European Union has chosen natural refrigerants as the path for the future development of the HVAC sector in the European Union. 
  • Versatility: high flow temperature up to 70ºC, allowing the replacement of boilers in installations with radiators.
  • Indoor installation: with a ventilation system that makes them suitable for any boiler room.

In addition, the ecoGEO+ PRO range has Ecoforest’s  efficiency and hybridisation capacity. Ecoforest’s distinctive management software allows the heat pump to adapt its operation to the needs of the installation, resulting in a greater efficiency.

In the case of installations with photovoltaics (PV), the heat pumps match perfectly the photovoltaic production to pave the way to a net zero building.

Ecoforest R290 ground source heat pump ecoGEO+ 2-10 PRO

Features

  • Power range: 2-10 kW
  • Efficiency: Up to 500%
  • Inverter technology with wide modulation ranges.  
  • R290 refrigerant: global warming index (GWP) of 3. 
  • Suitable for indoor installation.
  • Flow temperature up to 70ºC.
  • DHW production up to 75ºC.
  • Services: heating, domestic hot water (DHW), active and passive cooling, and pool heating.
  • Hybridisation with photovoltaic energy.  
  • Emission systems: radiators, underfloor heating, fan coils.
  • Total control of your installation: integrated energy meters and internet control with ecoSMART easynet.  
  • Available in Basic and Compact models.  
  • Compact installations: Compact models with integrated DHW tank.
  • Single-phase (230V) or three-phase (400V) power supply depending on the model.  
  • Optimised design to reduce noise levels.  
  • Compatible with High Temperature Recovery system (HTR): technology for simultaneous production of energy-saving services. 
  • Cascade configuration with up to 3 units (30 kW). 

Click on the drop-down menu to show files in French, German, Dutch and Italian

Technical manuals (2)

This section is only for registered users. Register or log in

Technical datasheets (1)

Schede tecniche

Pricelist (1)

This section is only for registered users. Register or log in

PV hybridization (3)

This section is only for registered users. Register or log in

Certificates (3)

This section is only for registered users. Register or log in

Software (13)

This section is only for registered users. Register or log in

Connectivity (3)

This section is only for registered users. Register or log in

Ecoforest Academy (7)

This section is only for registered users. Register or log in

Technical service (1)

This section is only for registered users. Register or log in

Procedures (1)

This section is only for registered users. Register or log in