Heat pump ecoGEO⁺ 4-16 PRO

Domestic ground source heat pump with Inverter technology and natural refrigerant R290 

In December 2020 Ecoforest launched the ecoGEO⁺ 1-6 PRO model and became the first European manufacturer to launch a ground source heat pump with natural refrigerant R290. In November 2023, the range was extended with the ecoGEO⁺ 2-10 PRO and ecoGEO⁺ 4-16 PRO models to meet the needs of any installation with the advantages of natural refrigerant:  

• A forward-looking refrigerant: the natural refrigerant R290 has a global warming coefficient 700 times lower than that of synthetic refrigerants. As a result, the European Union has chosen natural refrigerants as the path for the future development of the HVAC sector in the European Union. 
• Versatility: high flow temperature up to 70ºC, allowing the replacement of boilers in installations with radiators.
• Indoor installation: with a ventilation system that makes them suitable for any boiler room.

In addition, the ecoGEO⁺ PRO range has Ecoforest’s  efficiency and hybridisation capacity. Ecoforest’s distinctive management software allows the heat pump to adapt its operation to the needs of the installation, resulting in a greater efficiency.

In the case of installations with photovoltaics (PV), the heat pumps match perfectly the photovoltaic production to pave the way to a net zero building.

Features

• Power range: 4-16 kW
• Efficiency: Up to 500%
• Inverter technology with wide modulation ranges.  
• R290 refrigerant: global warming index (GWP) of 3. 
• Suitable for indoor installation.
• Flow temperature up to 70ºC.
• DHW production up to 75ºC.
• Services: heating, domestic hot water (DHW), active and passive cooling, and pool heating.
• Hybridisation with photovoltaic energy.  
• Emission systems: radiators, underfloor heating, fan coils.
• Total control of your installation: integrated energy meters and internet control with ecoSMART easynet.  
• Available in Basic and Compact models.  
• Compact installations: Compact models with integrated DHW tank.
• Single-phase (230V) or three-phase (400V) power supply depending on the model.  
• Optimised design to reduce noise levels.  
• Compatible with High Temperature Recovery system (HTR): technology for simultaneous production of energy-saving services. 
• Cascade configuration with up to 3 units (48 kW).